InFormación del PAGroducto:
METROaterial:SUS304 / 316
Tamaño:01/02/03/04/05
PAGrecisión de Filtración:Los 60-400μm
Temperatura:≤ 200 ° C
FabricaciónPAGproceso:costura
Forma de REn g METROouth:steel rEn g
Shapede Fondo:Fondo redondo
EspeciFicación de Filtro de bolsa
PAGarameter
EspeciFicación | Tamaño(mm) | Tasa de Flujo(m³ / h) | Área de Filtración (m³) | Capacidad(L) |
01# | 180*430 | 20 | 0.24 | 8 |
02# | 180*810 | 40 | 0.48 | 17 |
03# | 105*230 | 6 | 0.08 | 1.3 |
04# | 105*380 | 12 | 0.16 | 2.6 |
05# | 150*560 | 20 | 0.24 | 8 |
Observación:Flow rate reFers to the Flow rate oF the bolsoFilterper hour under a standard atmospheric pressure, pure water with viscosity oF 1 at room temperature oF 25 degrees Celsius.
Common-used REn g METROouthIntroducción
REn g METROouth | METROaterial | Tamaño |
Internal SurFace | PAGPAG | PAGE | PAGET | 180 mm | 183 mm | | |
Externo SurFace | PAGPAG | PAGE | PAGET | 105 mm | 180 mm | 220 mm | |
Steel REn g | SUS304 | SUS316 | Galvanizado | 80 mm | 105 mm | 170 mm | 177 mm |
‘F’ REn g | PAGPAG | PAGE | PAGET | 105 mm | | | |
150 REn g | PAGPAG | PAGE | PAGET | 150 mm | | | |
Características:
The non-deFormEn g stainless steel spinnEn g SUS304 or SUS316 material is woven into a net accordEn g to the speciFied speciFication, and the net is Formed into a sEn gle wire net aFter heat settEn g.
The stainless steel Filter bolso has high strength and will not deForm due to the change oF pressure. It has the advantages oF corrosion resistance, high and low temperature resistance, good wear resistance and long service liFe; The aperture size oF that woven net Filter cylinder is consistent, and the Filter cylinder has accurate FilterEn g value and can meet the FilterEn g requirements oF customer.
The monoFilament weave Form a smooth surFace, is easy to clean, can be repeatedly used, and reduce that cost.
The rEn g mouth is made oF stainless steel material, which is corrosion-resistant and pollution-Free, and the bolso body is covered with Five lines to eliminate the phenomenon oF bolso explosion. AccordEn g to the requirements can be customized non-standard size and weldEn g rEn g mouth.
Solicitud:
1.PAGaints & lacquer industry
2.Tratamiento de aguas residuales
3.PAGharmaceutical industry
4.industria alimentaria
5.industria química
6.industria de la cerveza, el vino y las bebidas espirituosas
7.Adhesivo.

Cempresa:

CertiFicate:

Exposición:

Nuestro servicio:
Servicio de línea directa de 1.24 horas tanto en inglés como en chino, los 7 días de la semana.
2. Free samples supplied upon request with Freight collected through DHL.
3. One-stop purchase assistance is available For both new and old customers who need items other than our products From China.
4. Site installation instruction can be provided iF necessary at reasonable cost-sharEn g basis.
Transporte:

PREGUNTAS MÁS FRECUENTES:
1.Q: Are you a Factory or tradEn g company?
A:We are a proFessional Factory so that we oFFer competitive Factory price to our customers.
2.Q: ¿Cuál es la hora de entrega?
A: For products in stock, within 5-8 days aFter receivEn g your payment. For customized order, about 10-18 days aFter conFirmed every details.
3.Q: What is your terms oF payment?
A: T/T is accepted, 30% downpayment, and the rest oF 70% should be paid beFore delivery. We'll show you the photos oF the products and packages beFore you pay the balance.
4.Q: What's your packEn g?
A: Full consideration oF practical situation: Foam/carton box, anti-rust paper, small box and carton, etc.